NAAC Accredited with B++ Grade
Permanently Affiliated to VTU, KA
Recognized By Govt. Of Karnataka
an ISO 9001:2008 Certified
Approved by AICTE
NBA Accredited

Publications

Dr. K N Shashidhara

  1. Study on effect of hardness and normal load on weight loss and plastic deformation morphology in three body abrasion, International journal of Engineering Research, Vol No. 5, Issue No. Special 6 PP 1129-1254 ISSN 2319-6890(Online)2347-5013 IF [1.818], 2016
  2. Studies on wear loss and deformation morphology in three body abrasion, International Journal of Innovative Technology and Exploring Engineering(IJITEE), ISSN:2278-3075, Vol 5 Issue No 10 IF[4.66], 2016
  3. Role of Hardness on Abrasive Wear Modes in a Three Body Wear, International Journal of Recent Technology and Engineering(IJRTE), ISSN:2277-3878, Vol 4, Issue 6 [4.46]

Dr. SHANKAR S

  1. Shankar et al.“Characterization of failure modes in Epoxy based E-Glass / Carbon woven fabric laminates” in International conference on Mechanical, Industrial and Manufacturing Engineering (ICMIME) at Bangkok, Thailand – organized by World Academy of Science, Engineering and Technology (WASET), Volume 60, December 2009, ISSN 2070-3724.
  2. Technical paper entitled “Characterization of Compressive Strength of Epoxy based E-Glass Laminate Composites” in National Conference on ‘Recent Trends in Mechanical Engineering’ (RTME 09) at Vemana Institute of Technology, Bangalore, November 23-24, 2009.
  3. Technical paper entitled “Characterization of Tensile Properties of E-Glass / Polyester woven fabric laminates” in National Conference on ‘Advances in Mechanical Engineering’ (AME 2009) at Vidya Vikas Institute of Engineering and Technology, Mysore, October 5, 2009.
  4. Shankar et.al. “Evaluation of Tensile Properties of E-Glass / Carbon woven fabric laminates” in National Conference on ‘Emerging Trends in Engineering Technology & Applications’ (NCETETA 09) at Shirdi Sai Engineering College, April 29-30, 2009.
  5. S. Shankar et al. “Study of Mechanical properties of Aluminium 2024 based hybrid composites” in National Conference on Recent Development in Mechanical Engineering, New Horizon College of Engineering.Bangalore, 25 February 2009.
  6. S.Shankar.et.al. “Development and Characterisation of thermal Barrier coatings on Conventional and direct metal Laser sintered in718 Superalloys”in International Journal of Engineering Science and Technology (IJEST) ISSN: 0975-5462 Vol. 7 No.12 Dec 2015 426-437.
  7. S.Shankar.et.al. “Comparative Study of Experimental and Simulated Results of Compression Test on Epoxy Based E-Glass / Carbon Fibre Reinforced Polymer Composite Laminates” in International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 4, Issue 8, August 2014.
  8. S.Shankar.et.al. “Characterization of Epoxy based E-Glass / Carbon Reinforced Polymer Composite laminates Subjected to Low Velocity Impact Test (Drop Weight)” in International Journal of Engineering Science & Technology (IJEST), Engineering Journals Publications, Volume 3, May 2013, ISSN 2278-9510.
  9. S.Shankar.et.al. “Experimental Evaluation of Flexural Properties of Polymer Matrix Composites” in International Journal of Mechanical Engineering & Technology (IJMET), Published by International Association for Engineering and Management Education (IAEME), Volume 3, December 2012, ISSN 0976-6340.
  10. S.Shankar.et.al. “Evaluation of Tensile properties of Epoxy based E-Glass-Carbon woven fabric laminates” in International Journal of Mechanical Engineering (IJME), Serials Publications, New Delhi, December 2010, Volume 3, ISSN 0974-5823.

Dr. Elangovan k

  1. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, Basappa S J “Tribological Behaviours of ABS and Polyamide 6 Polymer–Metal Sliding Combinations Under Dry Friction, Water Absorbed and Electroplated Conditions”, Journal of Engineering Science and Technology, Malaysia, (Submitted on 01-01-2014; Accepted on 20-01-2015; Online: Vol. 11(3), 2016). [H Index: 6]
  2. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, “Effects of Electroplating on the mechanical properties of Injection moulded Thermoplastics”, International Journal of Plastics Technology, Vol. 17(2), 2013., pp. 163-170, Springer. [H Index: 3, Cited by:2]
  3. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, “Development of Electroplating process for plating polyamides, Bangladesh Journal of Scientific and Industrial Research”, Vol. 48(3), 2013., pp. 205-212. [Cited by:1]
  4. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, “Development of Electroplating Setup For Plating ABS Plastics”, i-manager’s Journal on Mechanical Engineering, Vol. 2(3), 2012., pp. 52-57. [Cited by:2]
  5. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, “Enhancement of Impact resistance property of Nylon6 by the addition of CaSiO3 as a filler material”, International Journal of Applied Engineering Research, Dindigul, Vol. 2 (2), 2011., pp. 343-347. [Cited by:1]
  6. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, “Tribological Behaviours of CaSiO3 Reinforced Polyamide 6 Polymer–Metal Sliding Combinations Under Dry Friction Conditions”, Advanced Materials Manufacturing & Characterization 5 (1), 2015., pp. 142 – 147.
  7. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy,Arun S Bhide, “Flexural Properties of Calcium Meta Silicate Reinforced Polyamides, International Journal of Advanced and Innovative Research”, Vol. 2 (9), 2013., pp. 173-176.
  8. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, “Assessment of The Effect of Electroplating On The Mechanical Properties of Calcium Meta silicate Reinforced Nylon6 Composites”, Mechanical Confab, 1 (3), 2012., pp. 2 – 6.
  9. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, J N Prakash, “Investigations of the influence of filler on the impact properties of polyamides and its composites”, i-manager’s Journal on Mechanical Engineering, Vol. 1 (4), 2011., pp. 1-6.
  10. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, J N Prakash, “Influence of moisture content on 3-body Abrasive wear analysis of ABS plastics”, i-manager’s Journal on Mechanical Engineering, Vol. 1 (3), 2011., pp. 36-40.
  11. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, “Improvements in Impact Resistance Property of Metal Plated ABS and Nylon6 Thermoplastics”, FS Journal of Engineering Research, Vol. 1 (1), 2012., pp. 31-33.
  12. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, “Sliding Wear Behaviour of Injection Moulded ABS Samples Under Normal, Water Absorbed And Electroplated Conditions, International Journal of Scientific Progress and Research, Vol. 8 (1), 2015., pp. 28-33.
  13. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, P Sampath kumaran, S Seetharamu “Study On The Addition Of Calcium Silicate To Polymer Matrix Affecting The Tensile Property”, Journal of Basic and Applied Research, Submitted on (19-02-2015).
  14. Mithun V Kulkarni, K Elangovan, K Hemachandra Reddy, Naveen, Ravi, “Effects of Electroplating on the Mechanical Properties of FDM-PLA Parts”, Journal of Future Engineering and Technology, Submitted on (29-10-2014).
  15. Arul prakasa jothi, K. Elangovan, K. Hema Chandra Reddy, S. Suresh, Experimental Study of Preparation, Characterisation and Thermal Behaviour of Water-based Nano fluids containing Titanium Oxide Nano particles, Applied Mechanics & Materials, (ISSN: 1662-7482)766-767 (2015)  348-354
  16. Arulprakasajothi, K. Elangovan, K. Hema Chandra Reddy, S. Suresh,Heat Transfer Study of Water-based Nano fluids Containing Titanium Oxide Nanoparticles, Materials Today: Proceedings 2 (4-5), (2015) 3648–3655.
  17. Arulprakasajothi, K. Elangovan, K. HemaChandra Reddy, S. Suresh, Experimental investigation on heat transfer effect of conical strip inserts in a circular tube under laminar flow, Frontiers in Energy, (2016)1-7.

Dr. Sreenivas s

  1. Sreeinivas S, “Development and Characterisation of Thermal Barrier Coatings on Conventional and Direct Metal Laser Sintered in718 Superalloys”, International Journal of Engineering Science and Technology (IJEST) ISSN : 0975-5462 Vol. 7 No.12 Dec 2015
  2. Sreenivas S “Dilapidation of the TBC system during the Burner Rig Test”, International Journal of Engineering and Technology, Vol. 7(3), Jun – July 2015, ISSN : 0975-4024

Prof. Naveen kumar a

  1. “Study Of Polymer Material Used As Biomaterial”, Naveen Kumar. A., Dr.Gangadhara b, International Journal of Engineering Research & Technology, Volume. 4 – Issue 5, May 2015
  2. “Study Of Properties On Polymer Materials Used As Biomaterials For Implants”Naveen Kumar A, Dr.Gangadhara Shetty B, International Journal Engineering & Research Volume 5 – Issue Special 6 – 20th May 2016
  3. “Study On The Behavior Of The Polymer Materials With Biomaterials”Naveen Kumar A, Dr.Gangadhara Shetty B, International Journal Engineering & Research Volume 5 – Issue Special 6 – 20th May 2016
  4. “Design Of Car”Naveen Kumar A, Dr.Gangadhara Shetty B, Chintu Kumar – International Journal Engineering & Research Volume 5 – Issue Special 6 – 20th May 2016
  5. Design And Analysis Of Skid Frame For Pumping Station – Naveen Kumar A, Dr.Gangadhara Shetty B, Naveena M, Sudhakar – International Journal Engineering & Research Volume 5 – Issue Special 6 – 20th May 2016
  6. A Review Of Recovery Of Energy From Waste – Naveen Kumar A, Dr.Gangadhara Shetty B, Anoop Kumar G – International Journal Engineering & Research Volume 5 – Issue Special 6 – 20th May 2016 Presented a Paper on “Polymer Materials Compared With Bio-Materials” in the 8th Annual Conference jointly organized by Karnataka Science & Technology(KSTA) and Bangalore Institute Of Technology during NOVEMBER 2015

Paper Presented National/International Conference

  1. Presented a paper on “Experimental Study Of Wear Test & Analysis On Polymer Materials Compared With Ss316l Used As Biomaterial” in the National Conference on “Recent Advances in Mechanical Engineering & Their Impact on Indian Industries(RAMEIII-2012) TEQUIP sponsored held during September 2012  in PDA College Of Engg., Gulbarga
  2. Presented a paper on “Study & Analysis Of Wear Test On Polymer Materials Compared With Ss316l Used As Bio-Material” at the National Conference on Recent Trends In Mechanical Engineering NCRTME12 held at Hyderabad on October 2012
  3. Presented a paper on “Smarter Polymer Materials In Bio-Medical Applications” in the International Conference on Development of Smart Cities: Interface Governance & Technology, – at Ambedkar Institute of Technology, Bengaluru on September 09th& 10th 2016

Prof. Arun L R

  1. Arun L R, Effect of AL2O3 and fly ash reinforced particulates for fatigue behavior of the AL6061T6 alloy matrix composites in International Journal of Engineering Research (IJER) vol.5, Issue 06, pp. 1129 – 1254
  2. Arun L R, Modeling and performance analysis of Aluminium metal matrix composite pistons by using CAE tools in NAFEMS World congress,June 2015 pp.8859-8864
  3. Arun L R Effect on strength due to optical fibre embedding in advanced composites during structural health monitoring in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.3, Issue
    01,January2014 pp.8859-8864
  4. Arun L R Characterisation of aluminum fly ash-alumina composite for piston analysis by CAE tools in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.2, Issue 12,December-2013 pp.8047-8060
  5. Arun L R Performance analysis and material Optimization of Disc Brake using MMC in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.2, Issue 8,August-2013 pp.4101-4108
  6. Arun L R Numerical Analysis And Comparison Of An Abs Centrifugal Pump Casing With Ductile Iron in International Journal of Engineering Research & Technology (IJERT)Vol. 2 Issue 6
  7. Arun L R Evaluating For Rear Axle Housing Using Hybrid Aluminium Composite in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.2, Issue 6, pp.2514-2519
  8. Arun L R Non Linear Transient Thermal And Structural Analysis Of Rotor Assembly Of A Micro Gas Turbine in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.2, Issue 6, pp2530-2542
  9. Arun L R Nonlinear Analysis And Fatigue Life Estimation Of Attemperator Using FE Based Approach in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.2, Issue 6, pp2507-2513
  10. Arun L R Residual Stress Analysis Of Coating Using Fe Based Approach in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.2, Issue 6, pp.2520-2526
  11. Arun L R Analysis of Composite Drum Brake Using FEA Approach in International Journal of Engineering Trends and Technology (IJETT) – Volume 4 Issue 8- August 2013 pp.3398-3402
  12. Arun L R Dynamic Behaviour of Hybrid Aluminium6061T6 Metal Matrix Reinforced with Sic and Fly ash Particulates in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.2, Issue 6 pp.2501-2506
  13. Arun L R Analysis And Optimization of connecting Rod Using ALFASIC composites in International journal of innovative Research in Science, Engineering and Technology(IJIRSET) vol.2, Issue 6, pp.2480-2487
  14. Arun L R Characteristic Studies On Aluminium Based Silicon Carbide And Fly Ash Particulate Metal Matrix Composite in International Journal of Engineering Research & Technology (IJERT)Vol. 2 Issue 6, June – 2013.

Prof. Karunesh g

  1. Karunesh G, Lead Time Reduction in Order Execution of Horizontal Slurry Pumps Using Lean Concepts for Mining Equipments Manufacturing Company” in International journal for scientific and engineering research – IJSER Volume 4, Issue3, March 2013 Edition (ISSN 2229-5518).
  2.  Karunesh G, “Determination of mechanical properties of Aluminum Alloy (7075) reinforced with Aluminum oxide (Al2O3)” in International Journal of Engineering Research – IJER ISSN: 2319-6890(online), 2347-5013 Volume No.5 Issue: Special 6, pp: 1129 – 1254 20 May 2016.
  3. Karunesh G, “Structural evaluation of an automobile wheel” in International Journal of Engineering Research – IJER ISSN: 2319-6890)(online),2347-5013(print) Volume No.5 Issue: Special 6, pp: 1129 – 1254 20 May 2016.

Prof. Naveen m

  1. Naveen M, ‘Design and analysis of skid frame for pumping station’, International Journal of Engineering Research ISSN: 2319-6890)(online),2347-5013(print) Volume No.5 Issue: Special 6, pp: 1129 – 1254 20 May 2016

Prof. Basavaraj kusamannavar

  1. Basavaraj Kusamannavar, ‘Design & analysis of seat tilting of a wheelchair by using hydraulic system’, International Journal of Engineering Research ISSN: 2319-6890)(online),2347-5013(print) Volume No.5 Issue: Special 6, pp: 1129 – 1254 20 May 2016
  2. Validation of Plate Heat Exchanger Design Using CFD, IJMERR, Volume 2, No. 4, October 2013
  3. Effects Of Heat Source Location On Natural Convection In A Square Cavity, IJERT ISSN:2278–0181, Vol.1 – Issue 6, 2012

Prof. Punith Kumar S V

“Experimental Investigation on Injection Parameters by varying Compression Ratio Using Fish Oil Biodiesel in Diesel Engine”IJIMINDS Journal, Volume-02, Issue-01, Jan 2015, ISSN:2349-2082

Prof. Manjunath t v

Design and analysis of skid frame for pumping station, International Journal of Engineering Research ISSN: 2319-6890)(online),2347-5013(print), Volume No.5 Issue: Special 6, pp: 1129 – 1254 IF [1.818], 2016